-
Metal-to-Plastic Conversion: Cut Costs, Liberate Design, Improve Functionality
While metal has been the traditional material of choice for orthopedic instrumentation, new plastic resins combined with scientific process development and validation are making inroads into that market. The results have yielded lower costs, more flexible designs, and improved single--use and reusable orthopedic instruments. Speakers: Chris L. Wartinger, Business Development Manager, MackMedical/Mack Molding Co. James Hicks, Solvay Advanced Polymers, LLC
18:53
-
EPA regulations regarding PTFE coatings and options for Device Manufacturers
Explains the mandatory removal of pfoa from the presently specified ptfe coatings [like Teflon(r)] and the EPA'a position. Then, covers the range of new coatings that are being developed and tested that comply with the EPA regulations and the pros and cons of each new type of coating. Speaker: Bruce M. Nesbitt, CEO, Surface Solutions Group, LLC
34:03
-
Portable Power Considerations for Medical Device Design
This session outlines the options available to medical device manufacturers in Li--ion battery technologies. Speaker: Dr. Robin Sarah Tichy, Marketing Manager, Medical, Micro Power Electronics, Inc.
26:30
-
Plasma Surface Modification for the Life Science Industry
This presentation aims to remove the "magic" from gas plasma surface modification. How plasma creates a chemically reactive environment at low temperature is explained, and how that environment changes surface properties by precision cleaning, activation, chemical functionalization and coating is summarized. Speaker: Demetrius Chrysostomou, Director of Technology, PVA TePla America
23:45
-
Addressing Quality Control Inspection & Measurement Challenges Utilizing Vision Technologies
Advanced machine vision solutions are making possible 100% inspection in high speed or high precision environments. Now micron level inspection of surfaces for defects as well as measuring parts to ensure specification compliance is not only viable but highly cost effective. Carlos Jorquera, CEO/CTO, Boulder Imaging
10:52
-
Additive Manufacturing with ISO 10993 Class VI materials "parts in hours ready for gamma"
Significantly reduce your time to market utilizing Additive Manufacturing with ISO 10993 Class VI materials. Parts in hours not days or weeks or months. Ready for gamma or ETO sterilization. Rapidly increasing your time to market.
21:28
-
3M™ Silicone Adhesive: An Answer to Gentle Skin Adhesion
In 2012, 3M™ - Medical Specialties is pleased to introduce a new skin-friendly adhesive technology, silicone pressure sensitive adhesives, into its line of products for use in the design and manufacturing of medical devices. Skin is a difficult substrate on which to adhere a medical device. Too little adhesion results in device failure whereas excessive adhesion may result in skin damage upon removal.
17:19
-
Cleaning Validations and Recent FDA Trends
This presentation will serve to familiarize the medical device community with the importance of cleaning validations, setting up an acceptable test plan for a validation and current trending within the FDA with regard to these validations. Determining the best path to take when setting up this testing can be difficult as it requires extensive knowledge of how the device is used, what it comes in contact with and generally how it will be processed for reuse.
20:53
-
The Ins and Outs of Stent Securement Testing Today
This presentation will compare the two modes of testing including a comparison of actual test data and ease of test setup and repeatability. The audience will walk away with an understanding of the importance of the test, current test methods and the latest innovations to improve testing methods such as Machine Solutions SR1000.
19:49
-
MicroBlasted Surface Finishes: How to Specify; How to Control
This presentation will cover the requirements for specifying and controlling the applied finish. Mechanical bonds and chemical reactions can vary significantly with slight changes in surface properties. As such, the finish must be tightly controlled. Particle velocity is a key component of the equation. This presentation outlines the dynamics of controlling particle velocity.
16:48
-
Catheter Shaft Optimization for Accurate Axial Positioning
This presentation will discuss the challenges related to the mechanics of these catheter systems, and methods available to improve the accuracy of positioning within the catheter. Successful examples that demonstrate the ability to reduce inaccuracy will be shown.
16:19
-
Functions and Benefits of Variable Speed Drive Compressors
Most compressed air systems waste a lot of energy and money. Variable Speed Drive (VSD) compressors represent an energy-saving solution for many industrial facilities - from small to large. VSD compressors match output to varying demand while minimizing energy consumption. The minimum in-rush starting current and near perfect motor power factor also contribute to improved air system efficiency, and an improved bottom line. Michael Camber, Marketing Services Manager, Kaeser Compressors, Inc.
17:49
-
New Non-Contact, Laser-Based Gauge for Measuring Length and Speed of Medical Products
As the medical manufacturing industry is driven to become more efficient and improve product quality, their ability to measure length and speed with increasing accuracy has become essential. Accurate length and speed measurements are critical to all attempts to improve process control automation. Speaker: Stuart Manser, Sales Manager, Western US and Canada, Beta LaserMike
18:46
-
Innovative Global Weighing Solutions
Efficient and accurate weighing from process floor to front office. Outlines the features and benefits of weighing devices offered by Avery Weigh-Tronix. Many of our scales are used in Green Energy applications. Ronald Adams, West Coast Division Sales Manager - Avery Weigh-Tronix
9:07
-
Engineered to be Green: Practical guide to introducing sustainable approaches
The "Engineered to be Green" presentation will provide valuable insight into and best practices for sustainable machine design and redesign for machine builders (OEMs) and end-users. Niels Ouwersloot, Area Manager/Sales Engineer, Beckhoff Automation
22:42