-
Specifying High-Performance Cables
8/16/2012
Learn About Different Factors to Consider When Specifying a High-Performance Cable
-
New Insulation Material Yields Smaller, Lighter, Greener Cables.
8/16/2012
Learn About a New Alternative Wire Insulation to PVC that is Smaller, Lighter, and Better for the Environment
-
Heat-Shrink Tubing: Versatile Tools for Maintenance and Repair
8/16/2012
Think of heat-shrink tubing as the duct tape for electrical wiring on the factory floor. Heat-shrink tubing is versatile, easy to use, and finds wide applicability in maintenance and repair. Heat-shrink tubing can be...
-
Avoiding Counterfeit Components
8/15/2012
Protect Yourself: Five Tips for Avoiding Counterfeit Components. Paramit takes every precaution possible to prevent counterfeit components from entering the manufacturing operation. In this white paper, specific...
-
Precision Glass Tubes for Point-of-Care (POC), In Vitro Diagnostic Test Kits
8/9/2012
Glass has a well-established presence in point-of-care (POC), in vitro diagnostic (IVD) test kits serving the clinical chemistry, hematology, urinalysis, cardiac markers, rapid testing and drugs-of-abuse markets.
-
Life Sciences Guidebook: Best Practices for Selecting & Implementing FDA Compliance Software Solutions
8/7/2012
As the world market evolves, product lifecycles are speeding up to accommodate market demand and keep up with competing products. As a result, Quality benchmarks need to evolve as well. Risk is fast becoming the...
-
IEC 60601-1 For Medical Battery Chargers
8/7/2012
Understanding, interpreting and implementing standards is a challenge in all industries. Medical standards for electronics can be particularly onerous, and while it is uncommon for regulatory changes to effect products...
-
Membrane Switch Case Studies
8/3/2012
A series of case studies from GDSI.
-
Design Tips for Rapid Injection Molding Volume 8
7/25/2012
Let’s face it; a gate is a necessary evil, a break in the otherwise continuous surface of an injection mold. While its vestiges are typically removed after molding, either automatically or manually, it leaves its “...
-
Designing for Moldability Volume 2: Undercuts and Through-Holes
7/25/2012
Houses in Monopoly™ land have no doors or windows. Maybe the tiny people who live there spend a lot of time indoors, or perhaps they’ve perfected teleportation. More likely, it’s because doorless windowless plastic...
-
Contamination Beward: Cleaning 101 for Fiber Optics
7/24/2012
Grasping a few basic cleaning techniques can also save you time and money.
-
Coated Stent Delivery of DNA (plasmids) - rabbit clinical
Coatings2Go LLC/Surface Solutions Laboratories, Inc.
7/23/2012
Metallic stents coated with a polyurethane emulsion containing plasmid DNA were implanted in rabbit iliac arteries to evaluate transgene delivery and expression in the vessel wall. The expression of the plasmid-encoded...
-
Focus on: PTFE
7/23/2012
PTFE was the first of the family to be discovered and in some property areas still remains the most outstanding of the family. The development of the melt processable fluoropolymers required a move away from the pure...
-
Selecting a Laboratory for Pharmaceutical Stability Testing
7/17/2012
Stability testing is an essential component during the multi-phase drug development process for small and large molecule API's and small and large molecule drug products. This whitepaper discusses the critical aspects...
-
Beyond Trade-offs: How Medical Device Manufacturers can Balance Innovation, Quality and Compliance While Improving Profit
MDDI - Medical Device and Diagnostic Industry News
7/16/2012
The medical device industry has always depended on product innovation to drive growth. Industry is poised for a sustained period of extreme growth fueled by a level of innovation that is scheduled to accelerate. Most...
-
Adhesives for the Assembly of Hard-to-Bond Plastics
7/12/2012
Many modern plastics used in a variety of industries are formulated specifically for their resistance to harsh chemical and environmental conditions. As a result, these substrates also tend to be difficult to chemically...
-
Harnessing Experience for Efficient Medical Device Product Development
7/2/2012
Device development is complicated by the need to work within a regulated environment which requires well defined processes and significant testing to demonstrate the safety and efficacy of the device. An experienced...
-
Hospital Executive Report, Part 2
MDDI - Medical Device and Diagnostic Industry News
6/27/2012
2012 began with the rocky start predicted for the US hospital industry, but hospital executives are optimistic regarding the prospects for the rest of the year. Sample Data from this Report: Half of the 100 executives...
-
Custom or standard rubber part? 6 factors to consider
Vicone High Performance Rubber Inc.
6/27/2012
While standard silicone or other rubber products are more readily available than customized solutions, they may not always be cheaper or the best solution for your particular application. Deciding whether to go with a...
-
Zen and the Art of Medical Device Development
6/21/2012
Actively Adapting Quality Philosophies to Speed the Project Lifecycle
